Relia Automatic Ferrous-Foundry Sand-Molding Open Line for Cast-Iron Engine Blocks and Brake Drums
Direct factory support
Get a quote that fits your project
Send your drawing or product reference, material grade and required quantity. Relia will review the requirements with you.
- Drawing & specification review
Confirm the supply scope and critical requirements.
- Samples before custom production
Review inspected samples before approving a batch.
- Inspection documents
Agree material and dimensional records for your part.
-
machine typesand molding machine, Foundry Machine Open Linevideo outgoing-inspectionProvided
-
machinery test reportProvidedcore componentsEngine, Bearing, Gearbox, Pump
-
voltageAC380V,50HZpower(w)21kw(28.16hp)
-
dimension(l*w*h)4000*2410*5180mm(157.48*94.88*203.94in)warranty1 Year
-
key selling pointsAutomatic up and down shootingweight (kg)15000
-
MaterialGalvanized SteelTypeSand casting molding machines production line
-
The Size Of Sand MoldCustom 520 * 620mm/600*700mm/700*800mmThickness of Sand Mold150-250 mm
-
Molding Speed(s/mold)23-47s/mold, CustomSqueezing PressureLess than 21MPa
-
Humidity of Sand Mold2.5-3.5%Thickness of Template25-30mm
-
Drive MethodElectric-pneumatic-hydraulicApplicationIron foundry, steel
-
Casting plantFoundry Sand Moulding Line
Plan automatic sand molding around the molds and foundry interfaces required by the casting project. This up-and-down sand-shooting machine and open-line enquiry serves iron or steel foundry work, including engine-block and brake-drum casting applications. Select the machine configuration independently from the overall line layout so the equipment proposal has a clear integration boundary.
Choose the DLZX Configuration and Mold
Options include DLZX5060XH, DLZX6070XH, DLZX7080XH, DLZX8090XH and custom mold size. Confirm the actual configuration rather than inferring dimensions from a model code. The mold-size references provide distinct starting points for the selected foundry requirement.
- 520×620 mm can be reviewed as a custom mold-size reference.
- 600×700 mm can be assessed against the selected casting arrangement.
- 700×800 mm can be considered with the actual machine configuration.
Agree the Sand and Cycle Conditions
Mold thickness is 150–250 mm, template thickness 25–30 mm and sand humidity 2.5–3.5%. The molding-speed reference is 23–47 seconds per mold with customization, while squeezing pressure is below 21 MPa. Keep those values connected to the approved mold and operating conditions when defining the machine acceptance test.
Match the Drive and Installation Interfaces
The electric-pneumatic-hydraulic drive uses AC380V/50Hz, with power referenced as 21 kW (28.16 hp). Galvanized steel is named, together with engine, bearing, gearbox and pump components. Confirm equipment dimensions for the chosen model separately from the production-line layout and its installation requirements.
Set the Foundry Handover Scope
Outgoing-inspection video and machinery test reports are provided. Agree the one-year warranty coverage and terms with the actual equipment and integration scope. The finished proposal should connect mold geometry, cycle conditions and utilities to the selected iron- or steel-foundry molding task.
