Custom Iron Stainless Steel Aluminum Sand Lost Wax Die Cast Parts with Turning Milling Five Axis Machining and Logo
Direct factory support
Get a quote that fits your project
Send your drawing or product reference, material grade and required quantity. Relia will review the requirements with you.
- Drawing & specification review
Confirm the supply scope and critical requirements.
- Samples before custom production
Review inspected samples before approving a batch.
- Inspection documents
Agree material and dimensional records for your part.
-
Product NameCustom Customized Die Casting Parts
-
Machined WorkTurning, milling, polishing, sandblasting,5 axis machiningMaterialGray iron, ductile iron, cast steel, stainless steel, aluminum, etc
-
RoughnessRa0.2-Ra3.2Tolerance±0.1mm-±0.5mm
-
Surface TreatmentSandblasting, painting,polishing, electrophoresis, electroplating, etcMOQ10 Pieces
-
LogoAccept Custom LogoDelivery Time20-30 Days
-
OEM/ODMOEM ODM Die Casting Service
OEM/ODM custom component enquiries cover gray iron, ductile iron, cast steel, stainless steel or aluminum. Select a suitable sand, lost-wax investment or die-casting route for the drawing. Turning, milling and five-axis machining are named work options for the required finished geometry.
Assign limits to the selected interfaces
The tolerance span is ±0.1 mm to ±0.5 mm. Define the limits for each dimension and processing stage, with the relevant datums and supplied condition. Roughness is referenced as Ra0.2–Ra3.2; identify the unit, measured surfaces and required assessment method.
Set the final surface and appearance
Sandblasting, painting, polishing, electrophoresis and electroplating are named treatments for appropriate selected materials. Mark coverage or masking at functional areas and define the contact condition required after finishing. Include visual criteria on identified faces alongside their dimensional acceptance.
- Provide quantity and the controlled revision.
- State the complete grade and material condition.
- Mark cast and finished-interface boundaries.
- Define material and dimensional approval records.
Complete identification and sample requirements
Custom logos are accepted and the minimum order is 10 pieces. Provide artwork, placement and the intended identification result for the part. Identify placement restrictions where marking could interact with fitted or visible faces. Agree what the approval sample must demonstrate for geometry and appearance, keeping production acceptance tied to the selected material, actual route and final supplied-state definition rather than a combined set of unrelated processes.
