Relia A356 Aluminum Sand-Cast Textile-Machine Head Housings and Chassis for Weaving and Spinning Equipment
Direct factory support
Get a quote that fits your project
Send your drawing or product reference, material grade and required quantity. Relia will review the requirements with you.
- Drawing & specification review
Confirm the supply scope and critical requirements.
- Samples before custom production
Review inspected samples before approving a batch.
- Inspection documents
Agree material and dimensional records for your part.
-
Product nameSand Casting A356 Aluminum Alloy Textile Machine Head Housing Chassis
-
Materialaluminum ZL101,A356, A360 AC2C or as customer's requirementsProcessCustom Sand Casting
-
Heat TreatmentT5-T6Drawing Formatpdf,stp,step,stl,etc
-
Surface FinishedSandblasting, painting, polishing or as customer's requirementsCertificateISO
-
Weight0.05kg~20kg for Textile Machine Head Housing ChassisPackageBig Plastic Bag Inside,Multilayer Wooden Box outside
-
Delivery timeFor sample about 45 days of Textile Machine Head Housing Chassis
Define the textile-machine head housing or chassis through the interfaces it needs in weaving or spinning equipment. This custom aluminum sand-casting enquiry focuses on the actual component drawing and selected material condition. Keep the mounting and mating geometry attached to the ordered housing or chassis so the casting proposal follows its role in the textile machinery.
Choose the Alloy and Required Condition
Material requests include ZL101, A356, A360, AC2C or the customer's specified alloy. Select the complete grade and the T5 or T6 condition required by the design, with applicability agreed for that material. The heat-treatment requirement should describe the chosen component rather than imply that every alloy and condition is interchangeable.
Set the Housing or Chassis Surface
Identify the final surfaces and appearance criteria needed for the selected textile-machine part. Define the required treatment, coverage and supplied condition against the same drawing used for mounting and mating dimensions.
- Sandblasting can be allocated to the specified housing or chassis surfaces.
- Painting can follow the component's required final appearance.
- Polishing can be agreed for the selected material and surface criteria.
- Other customer-requested treatment can be defined separately for the actual part.
Submit the Textile-Equipment Drawing
PDF, STP, STEP and STL are the named drawing-data options. Provide the required quantity, complete material requirement and finished interfaces with the component acceptance criteria. A large plastic bag inside a multilayer wooden box is the named packing arrangement. Request the actual ISO document identity and applicable supplier scope where documentation is required, keeping the housing or chassis proposal tied to the intended weaving or spinning assembly.
