Relia Automatic Green-Sand Foundry Production Line and Complete Clay-Sand Casting System for Global Turnkey Projects

• machine type

  vacuum casting machine, foundry equipment, automatic production line, clay sand
  video outgoing-inspection

  Provided
• machinery test report

  Provided
  core components

  PLC, Bearing, Gearbox, Engine, Motor, Pressure Vessel, Gear, Pump
• voltage

  380v 60hz, 380v 50hz, 220V 60Hz, 220V 50Hz
  power(w)

  Determined based on the equipment model
• dimension(l*w*h)

  Determined based on the equipment model
  warranty

  1 Year
• key selling points

  Fully automated production, high-end electrical co
  weight (kg)

  99999
• Material

  Q235 Steel
  production efficiency

  10-180T/H
• provision of service

  Installation at home and abroad
  Motor, vibration motor, bearing

  high-end brand

Bring the green-sand foundry project together around the process you intend to run. This automatic clay-sand production-line enquiry covers a coordinated system rather than a single casting component, allowing the equipment, control interfaces and installation responsibilities to be defined around your foundry layout. Begin with the sand route, intended output and downstream casting operations so the proposed line addresses the actual production task.

Build the Line Around the Sand Route

For green-sand preparation and molding, agree which process stages belong within the automatic system and where material enters and leaves the installation. A vacuum-casting requirement needs a separately defined equipment and process scope. Keep the required throughput basis connected to the selected sand conditions and operating arrangement when comparing line configurations.

• Q235 steel provides an explicit construction-material reference for the equipment enquiry.
• PLC control belongs within the named core-component scope.
• Bearing, gearbox, gear and pump requirements can be reviewed by their line roles.
• Engine, motor and pressure-vessel selections need configuration-specific agreement.
• Motor and vibration-motor component requirements can be included in the technical proposal.

Match Power and Layout to the Configuration

Electrical choices include 380V or 220V arrangements at 50Hz or 60Hz. Select the supply that matches the installation site, then confirm equipment power and overall dimensions for that model. Line layout and equipment interfaces should be approved together so the complete clay-sand system has a clear installation boundary.

Set the Turnkey Handover Criteria

Domestic and overseas installation services support the turnkey project enquiry. Outgoing-inspection video and machinery test reports are provided, while the one-year warranty needs agreed coverage, commencement and terms. Use the acceptance plan to identify the utilities, controls and process operation that the selected foundry line must demonstrate before project handover.