Custom FCD550 Ductile Iron and Steel Green Sand Shell Mold Castings with ISO8062 CT7–9 Reference
Direct factory support
Get a quote that fits your project
Send your drawing or product reference, material grade and required quantity. Relia will review the requirements with you.
- Drawing & specification review
Confirm the supply scope and critical requirements.
- Samples before custom production
Review inspected samples before approving a batch.
- Inspection documents
Agree material and dimensional records for your part.
-
Product nameCast iron parts
-
ApplicationIndustry,Machinery,Auto partsProducts enforce standardISO;DIN;ASTM;AISI;ASME;AWWA;JWWA,EN;BS;JIS;NF;GB
-
Technical products processGreen sand molding and shell molding processQuality-system certificationDNV;PED;ISO 9001:2008
-
Finished productHot GalvanizingSurface treatmentElectrostatic powder coating&blasting shooting
-
Foundry casting experienceFrom10mm to 2500mmTypeSand Casting Part
-
ToleranceISO 8062 CT7-9
Custom sand-casting enquiries include FCD550 ductile iron and separate steel components, with green-sand or shell-molding route choices. Industrial, machinery and automotive requests should identify the complete grade and actual component drawing. The supplied condition and acceptance requirements belong with the selected material and process.
Define the dimensional scope for the drawing
The dimensional reference is 10–2500 mm. Identify the relevant envelope or dimension for the selected part, together with its mounting and mating interfaces. ISO8062 CT7–CT9 is the casting-tolerance reference; assign it to agreed dimensions and the supplied stage being assessed.
Specify the finish for the actual substrate
Hot galvanizing, electrostatic powder coating and shot blasting are named finish requests. Choose the required treatment and mark coverage, masking and contact-surface boundaries. An appearance or coating acceptance instruction should relate to the condition in which the component will be delivered.
- Provide quantity and the controlled drawing revision.
- State the complete material standard and required condition.
- Mark functional datums and controlled interfaces.
- Identify the material, dimensional and surface records needed for approval.
Name the governing documents
Select the complete standard and edition within the stated standard families rather than treating a family name as a full requirement. DNV, PED and ISO9001:2008 are qualification or conformity references whose applicable documents and scope should be identified. Include any application-specific acceptance with the enquiry so that inspection and approval concern the actual component.
